Products – CRG Solutions

Products

Evencure

–

XDS

Features

Due to its unique formulation and blend of resins, Evencure XDS will begin to break down after 7 days and, if applied at the specified application rates, will totally oxidise and leave the surface, subject to UV exposure within 45 – 55 days of the application. This reduces the need for surface cleaning in preparation for after trades.

ADVANTAGES

Complies with Australian Standards AS3799
Achieves water retention of 90% or greater
Increased abrasion resistance
Contains no wax
Eliminates the need for curing by ponded water, damp hessian or polythene sheeting
Reduces concrete dusting
Reduces plastic shrinkage
One coat application
Can be removed, if required, by ConClena (stripper / degreaser)
Equipment washable in water
May have red fugitive dye added

USES

Evencure XDS is suitable for curing all freshly laid concrete either smooth or textured, indoors or outdoors.

Fibril Structo

–

X55

Features

Monofilament macro synthetic fibres to replace traditional steel reinforcement
High strength and ductility
High modulus
Good bond within concrete due to special shape
Special fibre coating ensures excellent distribution throughout the concrete matrix
Non-corrosive, easy to use and safer than steel fibres
Good resistance to all acids and alkalis

ADVANTAGES

USES

Precast concrete elements
Pre-covering in tunnels
Extruded roadway structures
Rigid concrete floors
Foundation layers
Parking areas and airport runways
Consolidation of walls
Marine/coastal defence concrete

Ad-Tek

–

WRRe

Features

Ad-Tek WRRe is a composite water reducing and set retarding admixture designed to produce concrete with improved water reduction and extended slump life.

ADVANTAGES

Medium water reduction
Retards set time in hoy weather
Reduces segregation
Increases workability

USES

Normal to medium performance concrete
Slump range: 80 – 130mm
Pumped and precast concrete
Offsets the effect of hot weather on setting times

Ad-Tek

–

WRAc

Features

Ad-Tek WRAc is a water reducing and accelerating admixture designed to provide water reduction and set acceleration. It may be used as a water reducing admixture for premix or precast in cool or winter conditions.

ADVANTAGES

Improves setting times in cold weather
Increases slump without further water addition
Reduces segregation
Improves pumping placing and finishing

USES

Compensates for increased setting times due to cold weather or the use of pozzolans
Precast concrete
Pumped concrete

Formrelease

–

WB

Features

Formrelease WB is a water based detergent type form release suitable for all form types.

ADVANTAGES

Totally water based
Low cost
Contains NO CAUSTIC
Contains NO SALTS
Contains NO OILS
Contains NO HYDROCARBONS
Environmentally friendly
Safe to use
Water wash up

USES

Concrete form release for all form types

Evencure

–

W30

Features

Evencure W30 is a wax-based, sprayable curing compound formulated to cure freshly laid concrete. It is a low to medium viscosity, white pigmented emulsion of specially blended waxes.

ADVANTAGES

USES

Evencure W30 is suitable for curing all freshly laid concrete, either smooth or textured, indoors or
outdoors.
NOTE: After thirty to thirty five (30-35) days the continuous film formed on the concrete surface will begin to degrade due to exposure to UV light. The rate of degradation will depend on the initial film thickness and the degree of UV exposure. Evencure W30 can be used as a debonding agent when applied to
the concrete sub-base prior to pouring the concrete base. This allows the two layers to expand and contract differentially without producing cracking .

GeoRez

–

Urea Silicate Grout

Features

GeoRez is a fire resistant injection system based on urea silicate technology. It is designed to rapidly stabilise strata and coal by giving them structural strength and flexibility. In addition to being fire resistant ,due to its unique silicate chemistry, the maximum exotherm reached during curing is well under the
maximum allowed.

GeoRez can be used in wet environments where it shows good adhesion to wet surfaces, but will not absorb water.

ADVANTAGES

Flame resistant and will not support combustion
Not hazardous once cured and contains no, filtrates or leachates
High early and final strengths
Easy to handle store and use

USES

Tunnelling – Sealing faces and walls, grouting tunnel structures, sealing fracture zones etc
Coal – Stabilising and strengthening strata.
Containment – curtain grouting around oil and chemical storage facilities or polluted sites
Water storage – curtain grouting under dam walls, sealing fractures in foundations, preventing seepage and losses

AD-TEK H

–

Surface Hardener

Features

AD-TEK H is a blended aqueous solution, free of chlorides. It is especially formulated as a penetrative corrosion Inhibitor that significantly hardens the surface and increases the durability of concrete.

On new hardening concrete, AD-TEK H:

Reduces water loss of fresh concrete by 40%
Promotes efficient cement hydration
Stops surface dusting
Reduces surface cracking
Increases surface hardness, impermeability and durability
Enhances concrete protective properties against steel reinforcement corrosion

As a primer for most cementitious renders and polymeric coatings, AD-TEK H:

Increases the adhesive bond strength of the renders and polymeric coatings

As a treatment for brickwork, AD-TEK H:

Works as a hardener and durability enhancer of brickwork joints

ADVANTAGES

Densifies and hardens the surface layer
Stops surface dusting
Increases impermeability, chemical resistance and durability
Restores the protective properties of the concrete against reinforcement corrosion.
Repairs cracks up to 1mm.

USES

Restoration of degraded concrete structures (approved for use on Heritage sites).
Dust proofing of factory floors.
Surface hardening and abrasion resistance of concrete surfaces i.e. floors, road works, bridge decks etc.
Reinstatement of poorly finished concrete.
Primer for cementitious renders and cementitious crack repair systems
Primer for coatings of all types.
Water retention agent for new hardening concrete.

AD-TEK PW

–

Surface Hardener

Features

Ad-Tek PW is a blended silicate solution, free of chlorides that provides long-term waterproofing and durability to concrete. Ad-Tek PW penetrates into the concrete and reacts with free calcium forming a calcium silicate gel in pores, capillaries and cracks. This gel creates a sub-surface barrier against the penetration of water and contaminants such as chloride and sulphate ions, protecting steel against corrosion and increasing sulphate resistance of concrete. After application, the Ad-Tek PW remains active in the concrete body to provide, self-generating healing properties to future hairline cracks.

ADVANTAGES

On new hardening concrete

Ad-tek PW reduces water loss of fresh concrete by 25%
Promotes efficient cement hydration
Stops surface dusting
Reduces surface cracking
Increases surface hardness, impermeability and durability
Enhances concrete protective properties
against steel reinforcement corrosion

USES

As a waterproofing and durability enhancer

Provides long-term waterproofing
Seals cracks up to 2mm
Densifies and hardens the surface layer, increasing the protective properties of the concrete against reinforcement corrosion.
Increases chemical resistance.
Easy to handle store and use
Can permeate through substrates down to silty fine sands

On new hardening concrete

increases waterproofing, surface hardeners and durability
promotes efficient cement hydration during the curing phase
reduces the possibility of surface cracking

Siloseal W

–

Silicone Water Repellent

Features

Siloseal is a water-based silicone protective sealer, which penetrates deeply into the substrate to produce a hydrophobic barrier with. This treatment significantly reduces the absorption of water and reduces the migration of salts but still allows the passage of water vapour. Siloseal chemically bonds to mineral surfaces forming a hydrophobic barrier. The hydrophobic barrier prevents the passage of salts through stone, concrete or bricks and can be used either alone or as a primer coat for other paints. Discolouration of the substrate is uncommon but a test area prior to application is recommended.

ADVANTAGES

Water-based
Rapid-acting
Can be applied to damp surfaces
Provides an invisible water repellent Surface.
Water vapour permeable
Reduces cleaning costs
Will not yellow
Reduces efflorescence and surface salts
Not affected by temperature changes

USES

Siloseal

–

Silane-Siloxane Water Repellent

Features

Siloseal is a silane-siloxane protective sealer, which penetrates deeply into the substrate to produce a hydrophobic barrier with. This treatment significantly reduces the absorption of water and reduces the migration of salts but still allows the passage of water vapour. Siloseal chemically bonds to mineral surfaces
forming a hydrophobic barrier. The hydrophobic barrier prevents the passage of salts through stone, concrete or bricks and can be used either alone or as a primer coat for other paints. Discolouration of the substrate is uncommon but a test area prior to application is recommended.

ADVANTAGES

Provides an invisible water repellent surface.
Water vapour permeable
Reduces cleaning costs
Will not yellow
Reduces efflorescence and surface salts

USES

Sealtite

–

RLV

Features

Sealtite RLV is a rigid, transparent, low viscosity epoxy resin designed for fine cracks and honeycombs in concrete. Its very low viscosity allows for maximum penetration and it is suitable for cracks of 0.1mm or less.

ADVANTAGES

100% solids
Contains a UV-Visable tracer dye for easier quality control and inspection
Very low viscosity
Variations in pot life available
Low colour
Penetrates airline cracks

USES

Concrete crack injection
Repairing delaminated screeds, tiles and timber flooring.

Ad-Tek

–

R-F

Features

Ad-Tek R-F is a unique brushable penetrative fine cementitious coating specially designed for waterproofing and protection of old and new concrete against positive and negative water pressure.
Ad-Tek R-F prevents the penetration of water and other liquids into the concrete by causing reactions that produce non-soluble cementitious formations within the pores and capillaries of concrete. These formations grow in the presence of water, blocking pores, capillaries and minor shrinkage cracks, thus waterproofing concrete.
Ad-Tek R-F contains a Migrating Corrosion Inhibitor which significantly increases the corrosion protection of steel reinforcement in concrete.

ADVANTAGES

When correctly applied as a coating, Ad-Tek R-F:

Forms an indivisible body with the base concrete
Significantly increases impermeability of concrete
Resists extreme hydrostatic pressure from either positive or negative surface of the concrete slab • Can be applied to the positive and negative side of the concrete surface
Can seal hairline cracks up to 0.5 mm
Enhances the properties of concrete against reinforcement corrosion
Significantly reduces chloride penetration
Allows concrete to breath
Does not require a dry surface
Has a life greater than 10 years.

USES

Concrete water towers and reservoirs
Water treatment and sewage plants
Swimming pools
Roof decks
Underground tunnels
Basements and foundations
Chemical and fertilizer plants
Bridge pylons, beams and decks
Marine structures
Below ground car parks

Ad-Tek

–

R

Features

Ad-Tek R is a unique penetrative cementitious coating specially designed for the waterproofing, protection and repair of old and new concrete.
Ad-Tek R prevents the penetration of water and other liquids into the concrete by causing the reactions those produce the non-soluble cementitious formations within the pores and capillaries of concrete.

ADVANTAGES

When correctly applied as a coating Ad-Tek R:

Forms an indivisible body with the base concrete.
Significantly increases impermeability of concrete
Resists extreme hydrostatic pressure from either positive or negative surface of the concrete slab
Can be applied to the positive and negative side of the concrete surface
Can seal hairline cracks up to 0.5 mm
Enhances the properties of the concrete against reinforcement corrosion
Significantly reduces chloride penetration
Allows concrete to breath
Does not require a dry surface
Has a life greater than 10 years.

USES

Concrete water reservoirs
Water treatment and sewage plants
Swimming pools
Roof decks
Underground tunnels
Foundations
Chemical and fertilizer plants
Bridge pylons, beams and decks

Ad-Tek

–

Plug

Features

AD-TEK PLUG is a one-component, rapid hardening plug composition for permanent stopping of water seepage and pressure leaks through cracks and construction joints in concrete, rock, wooden and masonry structures.
AD-TEK PLUG is a chloride free, ready for use grey powder based on Portland cement with special additives.

ADVANTAGES

mixed just with water or can be used as a dry powder
stop water flow
fast setting with rapid strength development
permanent durable repair
can be installed underwater
high water-stopping power and hydraulic resistance
good adhesion to repaired material
non-toxic
easy application

USES

AD-TEK PLUG can be used for the vertical, horizontal and overhead applications stopping water from static cracks and holes in:

water storage tanks
basements
building foundations
retaining walls
sewers
below ground car parks
mines

Sealco

–

Phoscrete

Features

Phoscrete is a high performance, non-shrink, phosphate-bonded grout. Phoscrete RSG excels in a wide range of applications within the construction and building industry where rapid strength gain is required. Once mixed Phoscrete produces a fast setting concrete that can withstand traffic within hours.
Phoscrete contains no Portland cement, requires only minimal surface preparation and does not require wet curing. It displays rapid early strength development and has a superior bond to most surfaces.
The engineering properties of Phoscrete such as Modulus, creep and co-efficient of thermal expansion, are similar to those of Portland cement concrete.

ADVANTAGES

Requires no pre-soaking or post curing
Cures rapidly for minimum down time
Will cure at temperatures down to -5oC
Comparable in appearance to ordinary concrete
Some self-levelling properties
Outstanding chemical bond

USES

Bedding machinery with heavy static loads and dynamic operating forces
Grouting anchor points, bridge supports or bedding plates
Rapid repair to concrete surfaces
Industrial floor repairs
Repairs to cold rooms, bridge decks, ramps, runways, loading docks etc.
Repair of concrete subject to high thermal shock
Embedding runway lighting

SealCure

–

P

Features

ADVANTAGES

Totally waterbased
Single pack
Reduces plastic shrinkage
Environmentally friendly
Can be applied by spray, roller or brush
Will not yellow in sunlight
Eliminates the need for curing by ponded water, damp hessian or polythene sheeting
Seals concrete surfaces
Equipment washable in water

USES

SealCure P is suitable for curing all freshly laid concrete either smooth or textured, indoors or outdoors.

Floseal

–

Oil and Sealer

Features

Floseal is a fluolopolymer based protective sealer which penetrates deeply into the substrate to produce an oil repellent barrier. This treatment produces a dry-look finish that significantly reduces the absorption of water and oil allowing spills to be cleaned quickly before they are able to penetrate and stain.

ADVANTAGES

UV stable
Water vapour permeable
Will not yellow or discolour
Low dirt pick up rate
Reduces maintenance costs – floor is easier to maintain, sweep and/or mop clean.
Dust proofs the concrete surface
Good resistance to traffic
Can be used on indoor or outdoor surfaces

USES

Absorbent stone surfaces
Warehouse floors
Coloured concrete
Exposed aggregate concrete
Carparks, ground level and multi story

Ad-Tek

–

MWR

Features

Ad-Tek MWR is a composite mid range water reducing admixture designed to produce concrete with improved water reduction and extended slump life. Ad-Tek MWR will produce high performance concrete where higher water reduction with easy placing and working is a requirement.

ADVANTAGES

High water reduction
Suitable for achieving slumps of 80 – 140mm
Reduces segregation

USES

Premix and precast concrete
High strength concrete

Geo 8000

–

Microcement

Features

Geo 8000 is a micronised cement grout with an average and a median particle size between 4 and 5 microns, The specific surface area is between 900-1000 m2/ kg. Geo 8000 can be used to stabilise and strengthen substrates to accommodate structural loadings, fill fissures and voids in rock and concrete structures, to consolidate ground for tunnelling operations or to grout structures in place after construction.

Geo 8000 is specifically designed to stabilise, strengthen and seal fine-grain substrates containing clay, silt or other fine particulates. Geo 8000 is ideally suited for curtain grouting and other permeability reduction applications.

ADVANTAGES

Non-toxic and environmentally friendly product
Contains no hazardous ingredients, filtrates or leachates
High early and final strengths
Water cement ration can be varied to suit the application
Easy to handle store and use
Can permeate through substrates down to silty fine sands

USES

Tunnelling – Sealing faces and walls, grouting tunnel structures, sealing fracture zones etc
Soil Stability – Stabilising land slip zones and embankments
Containment – curtain grouting around oil and chemical storage facilities or polluted sites
Water storage – curtain grouting under dam walls, sealing fractures in foundations, preventing seepage and losses
Oil Fields – sealing of underground storage facilities, sealing of water producing perforated zones

Sealtite

–

Injection accessories

Features

CRG injection accessories include brass and aluminium high pressure packers for both polyurethane and epoxy injection as well as high pressure pump connectors and low pressure syringe injectors for epoxy injection.

ADVANTAGES

6mm to 13mm diameter
55 – 250mm length
Push-on and hook-on connections
Custom sizes available
Compatible with all resin pumping systems

USES

Low and high pressure resin injection
Back grouting
Tunnel segment sealing
Crack repair

Ad-Tek

–

HB-T

Features

AD-TEK HB-T is a high build thixotropic synthetic fibre reinforced cement-based rheoplastic and non- segregating mortar.
AD-TEK HB-T is a chemical resistant compound of high strength designed to protect embedded steel reinforcement and repair damaged or spalling vertical, overhead and horizontal concrete surfaces.

ADVANTAGES

Can be applied 5mm-50mm in a single layer thickness, even in an overhead application
Overhead, vertical and horizontal applicable in enclosed or open environments, wet or dry conditions.
Excellent workability
Sulphate resistance
Shrinkage compensated
High early and ultimate strengths
Waterproof, highly impermeable
No added chlorides
Excellent abrasion resistance and durability
High freeze/thaw, carbonation and sulphate resistance.
Product, when correctly applied, has a life greater than 10 years.

USES

AD-TEK HB-T is used for the structural repair of concrete including:

Water treatment and sewage facilities
Marine structures
Bridges
Tunnels, pipes, outfalls and all below ground structures especially in harsh ground conditions
Walls, cooling towers chimneys and other concrete repair applications

Ad-Tek

–

HB

Features

AD-TEK HB is a balanced blend of sand, cement and active chemical components mixed together to create a high build mortar to repair damaged or spalling concrete surfaces.
AD-TEK HB when mixed with water creates a high build, chemical-resistant compound of high strength and impermeability which bonds strongly to the cement substrate.

ADVANTAGES

Contains no chlorides.
High mechanical strengths.
Forms an indivisible body with the base concrete.
Significantly increases impermeability and corrosion resistance of concrete.
Corrosion protection to reinforcement.
Excellent abrasion resistance and durability.
Can be painted over most coatings adhere well to the cured product.
Can be top coated with AD-TEK R or treated with AD-TEK PW for dramatically increasedwaterproofing and durability.
Product, when correctly applied, has a life greater than 10 years.

USES

Repair of damaged concrete structures such as bridges, roads, pipes, factory floors and other horizontal surfaces where a depth of fill of between 10 and 100 mm is required.

Ad-Tek

–

H

Features

AD-TEK H is a chemically blended aqueous solution, free of chlorides, especially formulated as a Penetrative Corrosion Inhibitor that significantly hardens the surface and increases the durability of concrete.
Laboratory and field testing indicates that treatment with AD-TEK H will provide protection for more than 10 years.

ADVANTAGES

As a performance and durability enhancer of existing concrete structures, AD-TEK H:

Densifies and hardens the surface layer
Stops surface dusting
Increases impermeability, chemical resistance and durability
Restores the protective properties of the concrete against reinforcement corrosion.

On new hardening concrete, AD-TEK H:

Reduces water loss by about 20%.
Promotes efficient cement hydration.
Stops surface dusting
Reduces surface cracking.
Increases surface hardness, impermeability and durability.
Enhances concrete protective properties against steel reinforcement corrosion.

As a primer for most cementitious renders and polymeric coatings, AD-TEK H:

Increases the adhesive bond strength of the renders and polymeric coatings

As a treatment of brickwork joints, AD-TEK H:

Works as a hardener and durability enhancer of brickwork joints.

USES

Restoration of degraded concrete structures (approved for use on Heritage sites).
Dust proofing of factory floors.
Surface hardening and abrasion resistance of concrete surfaces i.e. floors, road works, bridge decks etc.
Reinstatement of poorly finished concrete.
Primer for cementitious render.
Water retention agent for new hardening concrete.

Ad-Tek

–

Grout C

Features

AD-TEK Grout C is a non-shrink, non-metallic, free-flowing cementitious, high-strength structural grout.
AD-TEK Grout C is a volume stable grout containing a balanced blend of Portland cement, graded silica sands, flow improvement compounds, and a shrinkage compensating system.
AD-TEK Grout C is supplied as a dry powdered product which only requires mixing with water for use in grouting and levelling in a wide range of applications with gap widths of 10-100 mm.

ADVANTAGES

Micro-concreting for concrete repair and construction work
Floor levelling
Heavy duty base plate grouting
Machine bedplate
Crane rail soleplates
Bridge bearings
Structural column grouting
Cavities, gaps and recesses
Anchor bolts
For application where gas generation curing plastic expansion is undesirable e.g. hydrogen generation in underground mine applications

USES

No shrinkage
High early and ultimate strength
Excellent flow characteristics
Pumpable
Long work time
Chloride free
Non-staining

Sealtite

–

FLV

Features

Sealtite FLV is a flexible, transparent, low viscosity epoxy resin designed for fine cracks and honeycombs in concrete where movement is anticipated. Its very low viscosity allows for maximum penetration and it is suitable for cracks of 0.1mm or less.

ADVANTAGES

100% solids
Flexible
Contains a UV tracer dye for easier quality control and inspection
Very low viscosity
Variations in pot life available
Low colour
Penetrates hairline cracks

USES

Concrete crack injection
Repairing delaminated screeds, tiles and timber flooring.
Binder for polymer screeds

GeoRez

–

Fissurebond

Features

GeoRez Fissurebond is a fire-resistant injection resin based on urea silicate technology. It is designed to rapidly stabilise strata and coal by giving them structural strength and flexibility. In addition to being fire-resistant and due to its unique silicate chemistry, the maximum exotherm reached during curing is well under the maximum allowed. GeoRez Fissurebond can be used in wet environments where it shows good adhesion to wet surfaces, but will not absorb water.

ADVANTAGES

Flame resistant and will not support combustion
Not hazardous once cured
High early and final strengths
Easy to handle store and use

USES

Tunnelling – Sealing faces and walls, grouting tunnel structures, sealing fracture zones etc
Coal and hard rock mining-stabilising and strengthening strata.
Containment – curtain grouting around oil and chemical storage facilities or polluted sites
Water storage – curtain grouting under dam walls, sealing fractures in foundations, preventing seepage and losses

CRG

–

DP2 Drill Pump

Features

CRG DP2 Drill Pump is a premium quality electrically operated piston pump.
CRG DP2 is suitable or the high pressure injection of polyurethane and epoxy resins.
CRG DP2 delivers ample pressure and flow for all concrete injection applications, its steel and cast alloy construction ensures long life and reliability.

ADVANTAGES

Powerful 1100W two speed motor
Steel gears
Cast aluminium gearbox
Variable geometry couplings for smooth operation
Remote switch
High pressure hydraulic supply hose

USES

High pressure polyurethane injection
High pressure epoxy injection
Crack repair
Back grouting

CRG

–

DP1 Drill Pump

Features

CRG DP1 Drill Pump is a light weight electrically operated piston pump.
CRG DP1 is suitable or the high pressure injection of polyurethane and epoxy resins.
CRG DP1 is light weight, portable, easy to operate and maintain making it ideal for both residential and commercial applications.

ADVANTAGES

Single speed motor
light weight
Portable
Simple operation

USES

High pressure polyurethane injection High pressure epoxy injection
Crack repair
Back grouting

Formrelease

–

D

Features

Formrelease D is a chemical release agent for concrete formwork which acts as a bond breaker between the formwork or moulds and the concrete.

ADVANTAGES

Easy to apply
Wont stain or contaminate the concrete
Stable during placement and vibration of the concrete
Reduces rust buildup on steel moulds.

USES

Concrete form release for all form types

X-Pose

–

Concrete Surface Retarder

Features

X-POSE Concrete Surface Retarder is a uniquely formulated liquid that retards the surface of the concrete, whilst allowing the subsurface to still harden. This unique feature allows easy removal of the treated concrete while the subsurface concrete remains hard and limits the failure of aggregate bond in the exposed concrete.

Surfaces treated with X-POSE provide an excellent surface for bonding subsequent concrete overlays without the need for mechanical abrasion. X-POSE V is available as a paintable Gell for application onto formwork.

ADVANTAGES

Ready to use with no dilution
Totally water based
Controlled depth of penetration
Easy to handle store and use
VOC compliant

USES

Driveways and decorative concrete
Civil construction

GeoRez

–

Boltlock

Features

GeoRez Boltlock is a thixotropic, fire-resistant injection resin based on urea silicate technology. Separately, the two components of Boltlock are low viscosity liquids but upon mixing they quickly form a thixotropic non-sag gel suitable for overhead application. Boltlock expands slightly during curing, locking the bolt in place and reducing the need to retighten after installation.

GeoRez Boltlock can be used in wet environments where it shows good adhesion to wet surfaces, but will not absorb water.

ADVANTAGES

Flame resistant and will not support combustion.
Thixotropic
Controlled expansion locks bolts into place.
Not hazardous once cured.
High early and final strengths
Easy to handle store and use

USES

Tunnelling, coal and hard rock mining- Bolt embedment, filling hollow and split bolts.

Evencure

–

BCP

Features

Due to its totally unique formulation and blend of bitumen resins and hydrocarbons, Evencure BCP not only cures concrete but it also acts as a primer coat for asphalt and bitumen overlays. It is ideally suitable for bridge decks and road construction where a concrete curing compound and bitumen primer can be applied in one application.

ADVANTAGES

Complies with Australian Standards AS3799
Achieves water retention of >90%
Contains no wax
Reduces plastic shrinkage
Eliminates the need for curing by ponded water, damp hessian or polythene sheeting
Cationic emulsion
Ideal primer coat for asphalt or bitumen overlays on concrete roads, bridges or parking decks
Totally water based with no solvent odour
Clean equipment in water

USES

Evencure BCP is suitable for curing all freshly laid concrete either smooth or textured, indoors or outdoors.

AD-TEK AR

–

Admixture Powder

Features

AD-TEK AR is hydrophobic pore-blocking admixture for watertight concrete. AD-TEK AR is designed to reduce the rate of transmission of moisture and water-soluble salts (chlorides, sulphates etc.) through concrete. AD-TEK AR is a chloride free organic admixture supplied in a fine powder form. It does not contain any chemicals that might cause undesirable significant side effects when used in conjunction with other typically used concrete admixtures. AD-TEK AR reacts with the cement hydration products forming a hydrophobic film on pores in concrete, reducing capillary suction and minimising absorption and penetration of water, and preventing the ingress of potentially deleterious soluble materials, resulting in concrete with enhanced durability. AD-TEK AR is classified by AS 1478.1-200 as a Permeability-Reducing Admixture. When AD-TEK AR was tested in comparison with similar competitor products, its ability to improve water tightness in concrete was at least equal to competitors’ products. Unlike its competitor products, ADTEK-AR does not possess a strong ammonia smell.

ADVANTAGES

Significantly reduces water absorption and the permeability of water-soluble salts (chlorides, sulphates etc.), even in a low dosage rate.
Reduces chloride diffusion and could be a cost-effective replacement for Silica Fume used for this purpose.
Slightly increases initial compressive strength
Decreases plastic shrinkage and crack development by minimising evaporation of water from the surface of fresh concrete.
Does not affect water vapour permeability.
Improves abrasion resistance of surface.

USES

Water retaining structures
Corrosion resistant floors, columns etc
Tunnels and mining underground structures
Marine construction
Waste water treatment and desalination plants

Hardtop ASB

–

Acrylic Sealer

Features

Hardtop ASB is a premium grade co-polymer concrete sealer manufactured from a blend ofacrylic resins UV stabilisers and aromatic solvents held in solution. When dry, Hardtop ASB produces a wet look gloss finish which not only protects but also enhances the appearance of plain and coloured concrete.

ADVANTAGES

UV stable
Will not yellow or discolour
Eliminates oil and grease penetration
Gloss finish
Easily recoatable
Extremely low dirt pick up rate
Reduces maintenance costs – floor is easier to maintain, sweep and/or mop clean.
Hardens and dust proofs the concrete surface
Good resistance to abrasive traffic e.g. forklifts, trucks, cars, foot traffic etc.
Can be used on indoor or outdoor surfaces

USES

Imitation slate pattern paving
Imitation brick pattern paving
Stamped concrete
Warehouse floors
Coloured concrete
Exposed aggregate concrete
Carparks, ground level and multi story

Evenrange

–

AC

Features

Evencure AC is an acrylic modified emulsion used as a concrete curing compound that meets all the requirements of AS3799.

ADVANTAGES

Reduces water loss by greater than 90%
Complies to AS3799
Takes all after trades without the need for removal
Surface hardens and stops surface dusting
Increases impermeability, chemical resistance and durability
Reduces the possibility surface crazing or cracks appearing
Promotes efficient cement hydration

USES

SealCure

–

A9

Features

ADVANTAGES

Reduces plastic shrinkage
Totally waterbased
Will not affect adhesion of after trades
Gives an improved finish to the concrete surface when
trowelled or floated
Has no effect on the cement hydration process
Reduces “stickiness” to concrete tools during finishing

USES

SealCure A9 can be used on coloured concrete, prestressed or precast concrete, roads, bridges, etc. Evenrange AA is ideal for use with coloured dryshakes on concrete where extra time may be required to enable placement of stencils, mats, etc. The product is suitable for wood float, hand trowel or machine finishes.

FiberForce

–

950

Features

FiberForce 950 is a blend of polypropylene/polyethylene macrosynthetic monofilament fibers and 100% virgin polypropylene microsynthetic monofilament fibers.

ADVANTAGES

Provides post-first crack residual strength to concrete
Provides temperature-shrinkage reinforcement
Increases concrete durability – including impact and abrasion resistance and fatigue strength
Reduces plastic shrinkage and settlement cracking
Measurably reduces permeability, thus increasing freeze-thaw durability
Provides uniformly distributed reinforcement throughout the concrete, not just in one plane as with traditional steel reinforcement
A cost-effective alternative to traditional steel reinforcement
Delivered to site pre-mixed

USES

Interior Slabs-on-Ground

Commercial
Light, medium, heavy industrial, and warehouse

Exterior Slabs-on-Ground

Ingress-egress roadways (malls, industrial, and warehouse sites)
Parking facilities (malls, industrial, and warehouse sites)
State DOTs, specifications, and code applications Bridge decks

Sealtite

–

5000

Features

Sealtite 5000 is an elastic, MDI based, single- component polyurethane resin. This system reacts rapidly when in contact with water to provide a high strength,elastic polyurethane seal capable of shutting down water leaks while accepting significant movement.
Sealtite 5000 has a very high reactive content, this greatly enhances performance and minimises the possibility of leachable pollutants.

ADVANTAGES

Elastic
Highly active formulation
Low viscosity
Excellent adhesion to wet surfaces
Resistant to many common organic and inorganic chemicals, mild acids and alkalis
Solvent free
Injected as a single component
Factory set reaction speed

USES

Pipe and tunnel segment sealing
Back grouting
Repairs where movement is expected

FiberForce

–

500

Features

FiberForce 500 is an ultra-low denier fibrillated fiber manufactured from 100% virgin homopolymer polypropylene resins.

ADVANTAGES

Replacement for typical light gauge welded- wire reinforcement (6 x 6 W1.4 x W1.4)
Excellent distribution throughout the concrete mix
Excellent temperature-shrinkage reinforcement • Excellent reduction in plastic shrinkage and settlement cracking
Extends service life of the concrete with reduced maintenance
Increases concrete durability – including impact and abrasion resistance and fatigue strength
Delivered to site pre-mixed

USES

Residential and Commercial Slabs-on-Ground
Ultra-thin whitetopping (UTW)
Architectural precast products and ornamental elements
Irrigation ditches and channels
Shotcrete applications

Sealtite

–

3000

Features

Sealtite 3000 is a semi flexible, MDI based, single- component polyurethane resin. This system reacts rapidly when in contact with water to provide a high strength and flexible polyurethane seal capable of shutting down large water leaks and accepting minor movement.
Sealtite 3000 has a very high reactive content, this greatly enhances performance and minimises the possibility of leachable pollutants.

ADVANTAGES

Semi flexible
Highly active formulation
Low viscosity
High sand binding ability
Resistant to many common organic and inorganic chemicals, mild acids and alkalis
Solvent free
Injected as a single component
Variable reaction speed

USES

High speed sealing of leaking cracks
Back grouting
Tunnelling

Sealtite

–

1000

Features

Sealtite 1000 is a ridged, MDI based, single- component polyurethane resin. This system reacts rapidly when in contact with water to provide a high strength polyurethane seal capable of shutting down large water leaks.
Sealtite 1000 has a very high reactive content, this greatly enhances performance and minimises the possibility of leachable pollutants.

ADVANTAGES

Highly active formulation
Low viscosity
High sand binding ability
Resistant to many common organic and inorganic chemicals, mild acids and alkalis
Solvent free
Injected as a single component
Variable reaction speed

USES

High speed sealing of leaking cracks
Ground stabilisation
Back grouting
Tunnelling

FiberForce

–

100

Features

FiberForce 100 is a unique, high tensile strength, high modulus of elasticity, ultra-thin monofilament fiber manufactured from 100% virgin homopolymer polypropylene resins.

ADVANTAGES

Uniform distribution throughout the concrete mix
Excellent finishability
Excellent reduction in plastic shrinkage and settlement cracking
Measurably reduces permeability, thus increasing freeze-thaw durability
Increases concrete durability – including impact and abrasion resistance and fatigue strength
Delivered to site pre-mixed

USES

Residential Slab-on-Ground
Commercial Slab-on-Ground
Decks and patios
Water retention tanks
Pool decks
Stucco
Dry packaged cement-based products
Precast products
Tunnel linings

CATEGORIES

Menu