0

Products

  1. Home
  3. Concrete Repair

Ad-Tek

–

Grout C

Features

AD-TEK Grout C is a non-shrink, non-metallic, free-flowing cementitious, high-strength structural grout.
AD-TEK Grout C is a volume stable grout containing a balanced blend of Portland cement, graded silica sands, flow improvement compounds, and a shrinkage compensating system.
AD-TEK Grout C is supplied as a dry powdered product which only requires mixing with water for use in grouting and levelling in a wide range of applications with gap widths of 10-100 mm.

ADVANTAGES
  • Micro-concreting for concrete repair and construction work
  • Floor levelling
  • Heavy duty base plate grouting
  • Machine bedplate
  • Crane rail soleplates
  • Bridge bearings
  • Structural column grouting
  • Cavities, gaps and recesses
  • Anchor bolts
  • For application where gas generation curing plastic expansion is undesirable e.g. hydrogen generation in underground mine applications
USES
  • No shrinkage
  • High early and ultimate strength
  • Excellent flow characteristics
  • Pumpable
  • Long work time
  • Chloride free
  • Non-staining
VIEW BROCHURE
Add to quote

Ad-Tek

–

H

Features

AD-TEK H is a chemically blended aqueous solution, free of chlorides, especially formulated as a Penetrative Corrosion Inhibitor that significantly hardens the surface and increases the durability of concrete.
Laboratory and field testing indicates that treatment with AD-TEK H will provide protection for more than 10 years.

ADVANTAGES

As a performance and durability enhancer of existing concrete structures, AD-TEK H:

  • Densifies and hardens the surface layer
  • Stops surface dusting
  • Increases impermeability, chemical resistance and durability
  • Restores the protective properties of the concrete against reinforcement corrosion.

On new hardening concrete, AD-TEK H:

  • Reduces water loss by about 20%.
  • Promotes efficient cement hydration.
  • Stops surface dusting
  • Reduces surface cracking.
  • Increases surface hardness, impermeability and durability.
  • Enhances concrete protective properties against steel reinforcement corrosion.

As a primer for most cementitious renders and polymeric coatings, AD-TEK H:

  • Increases the adhesive bond strength of the renders and polymeric coatings

As a treatment of brickwork joints, AD-TEK H:

  • Works as a hardener and durability enhancer of brickwork joints.
USES
  • Restoration of degraded concrete structures (approved for use on Heritage sites).
  • Dust proofing of factory floors.
  • Surface hardening and abrasion resistance of concrete surfaces i.e. floors, road works, bridge decks etc.
  • Reinstatement of poorly finished concrete.
  • Primer for cementitious render.
  • Water retention agent for new hardening concrete.
VIEW BROCHURE
Add to quote

Ad-Tek

–

HB

Features

AD-TEK HB is a balanced blend of sand, cement and active chemical components mixed together to create a high build mortar to repair damaged or spalling concrete surfaces.
AD-TEK HB when mixed with water creates a high build, chemical-resistant compound of high strength and impermeability which bonds strongly to the cement substrate.

ADVANTAGES
  • Contains no chlorides.
  • High mechanical strengths.
  • Forms an indivisible body with the base concrete.
  • Significantly increases impermeability and corrosion resistance of concrete.
  • Corrosion protection to reinforcement.
  • Excellent abrasion resistance and durability.
  • Can be painted over most coatings adhere well to the cured product.
  • Can be top coated with AD-TEK R or treated with AD-TEK PW for dramatically increasedwaterproofing and durability.
  • Product, when correctly applied, has a life greater than 10 years.
USES

Repair of damaged concrete structures such as bridges, roads, pipes, factory floors and other horizontal surfaces where a depth of fill of between 10 and 100 mm is required.

VIEW BROCHURE
Add to quote

Ad-Tek

–

HB-T

Features

AD-TEK HB-T is a high build thixotropic synthetic fibre reinforced cement-based rheoplastic and non- segregating mortar.
AD-TEK HB-T is a chemical resistant compound of high strength designed to protect embedded steel reinforcement and repair damaged or spalling vertical, overhead and horizontal concrete surfaces.

ADVANTAGES
  • Can be applied 5mm-50mm in a single layer thickness, even in an overhead application
  • Overhead, vertical and horizontal applicable in enclosed or open environments, wet or dry conditions.
  • Excellent workability
  • Sulphate resistance
  • Shrinkage compensated
  • High early and ultimate strengths
  • Waterproof, highly impermeable
  • No added chlorides
  • Excellent abrasion resistance and durability
  • High freeze/thaw, carbonation and sulphate resistance.
  • Product, when correctly applied, has a life greater than 10 years.
USES

AD-TEK HB-T is used for the structural repair of concrete including:

  • Water treatment and sewage facilities
  • Marine structures
  • Bridges
  • Tunnels, pipes, outfalls and all below ground structures especially in harsh ground conditions
  • Walls, cooling towers chimneys and other concrete repair applications
VIEW BROCHURE
Add to quote

Sealco

–

Phoscrete

Features

Phoscrete is a high performance, non-shrink, phosphate-bonded grout. Phoscrete RSG excels in a wide range of applications within the construction and building industry where rapid strength gain is required. Once mixed Phoscrete produces a fast setting concrete that can withstand traffic within hours.
Phoscrete contains no Portland cement, requires only minimal surface preparation and does not require wet curing. It displays rapid early strength development and has a superior bond to most surfaces.
The engineering properties of Phoscrete such as Modulus, creep and co-efficient of thermal expansion, are similar to those of Portland cement concrete.

ADVANTAGES
  • Requires no pre-soaking or post curing
  • Cures rapidly for minimum down time
    Will cure at temperatures down to -5oC
  • Comparable in appearance to ordinary concrete
  • Some self-levelling properties
  • Outstanding chemical bond
USES
  • Bedding machinery with heavy static loads and dynamic operating forces
  • Grouting anchor points, bridge supports or bedding plates
  • Rapid repair to concrete surfaces
  • Industrial floor repairs
  • Repairs to cold rooms, bridge decks, ramps, runways, loading docks etc.
  • Repair of concrete subject to high thermal shock
  • Embedding runway lighting
VIEW BROCHURE
Add to quote

Ad-Tek

–

Plug

Features

AD-TEK PLUG is a one-component, rapid hardening plug composition for permanent stopping of water seepage and pressure leaks through cracks and construction joints in concrete, rock, wooden and masonry structures.
AD-TEK PLUG is a chloride free, ready for use grey powder based on Portland cement with special additives.

ADVANTAGES
  • mixed just with water or can be used as a dry powder
  • stop water flow
  • fast setting with rapid strength development
  • permanent durable repair
  • can be installed underwater
  • high water-stopping power and hydraulic resistance
  • good adhesion to repaired material
  • non-toxic
  • easy application
USES

AD-TEK PLUG can be used for the vertical, horizontal and overhead applications stopping water from static cracks and holes in:

  • water storage tanks
  • basements
  • building foundations
  • retaining walls
  • sewers
  • below ground car parks
  • mines
VIEW BROCHURE
Add to quote

Ad-Tek

–

R

Features

Ad-Tek R is a unique penetrative cementitious coating specially designed for the waterproofing, protection and repair of old and new concrete.
Ad-Tek R prevents the penetration of water and other liquids into the concrete by causing the reactions those produce the non-soluble cementitious formations within the pores and capillaries of concrete.

ADVANTAGES

When correctly applied as a coating Ad-Tek R:

  • Forms an indivisible body with the base concrete.
  • Significantly increases impermeability of concrete
  • Resists extreme hydrostatic pressure from either positive or negative surface of the concrete slab
  • Can be applied to the positive and negative side of the concrete surface
  • Can seal hairline cracks up to 0.5 mm
  • Enhances the properties of the concrete against reinforcement corrosion
  • Significantly reduces chloride penetration
  • Allows concrete to breath
  • Does not require a dry surface
  • Has a life greater than 10 years.
USES
  • Concrete water reservoirs
  • Water treatment and sewage plants
  • Swimming pools
  • Roof decks
  • Underground tunnels
  • Foundations
  • Chemical and fertilizer plants
  • Bridge pylons, beams and decks
VIEW BROCHURE
Add to quote

Ad-Tek

–

R-F

Features

Ad-Tek R-F is a unique brushable penetrative fine cementitious coating specially designed for waterproofing and protection of old and new concrete against positive and negative water pressure.
Ad-Tek R-F prevents the penetration of water and other liquids into the concrete by causing reactions that produce non-soluble cementitious formations within the pores and capillaries of concrete. These formations grow in the presence of water, blocking pores, capillaries and minor shrinkage cracks, thus waterproofing concrete.
Ad-Tek R-F contains a Migrating Corrosion Inhibitor which significantly increases the corrosion protection of steel reinforcement in concrete.

ADVANTAGES

When correctly applied as a coating, Ad-Tek R-F:

  • Forms an indivisible body with the base concrete
  • Significantly increases impermeability of concrete
  • Resists extreme hydrostatic pressure from either positive or negative surface of the concrete slab • Can be applied to the positive and negative side of the concrete surface
  • Can seal hairline cracks up to 0.5 mm
  • Enhances the properties of concrete against reinforcement corrosion
  • Significantly reduces chloride penetration
  • Allows concrete to breath
  • Does not require a dry surface
  • Has a life greater than 10 years.
USES
  • Concrete water towers and reservoirs
  • Water treatment and sewage plants
  • Swimming pools
  • Roof decks
  • Underground tunnels
  • Basements and foundations
  • Chemical and fertilizer plants
  • Bridge pylons, beams and decks
  • Marine structures
  • Below ground car parks
VIEW BROCHURE
Add to quote

PRODUCTS

Concrete Additives
Concrete Curing
Concrete Repair
Epoxy
Fibres
Microfine Cement
Polyurethane
Sealers
Surface Hardener/Retarder
Urea Silicate Resin
Menu